The induction port is closed so that the unit operates as a straight through cooling unit. Both electric and hot water reheat options are available. HEPA filters may be installed either upstream or downstream of the terminal unit depending on whether the room pressure is negative or positive. The fan and damper are set to maintain pressure in the room being served. Temperature control is through reheat in the unit. The CVP feature allows designers to take advantage of Nailor's EPICTM fan technology and its associated low operating costs for pressurization. "Smart" Brushless DC motor technology provides continuous monitoring, automatic compensation and precise control and maintenance of discharge airflow regardless of discharge static pressure variations incurred by a HEPA filter. Available in three units sizes, suitable for 200 – 3000 cfm (94 – 1416 l/s) zone designs with up to a maximum total external discharge static pressure of 1.0" w.g. (249 Pa). Ideally, suited to clean room applications such as hospital isolation wards, operating rooms, pharmaceutical and biotechnology manufacturing and research facilities.
FEATURES:
- Unique 16 ga. (1.6) galvanized steel channel space frame construction provides extreme rigidity and 20 ga. (1.00) casing components.
- 16 ga. (1.6) galvanized steel inclined opposed blade primary air damper operating on a 45° arc.
- EPICTM/ECM motor fan technology.
- Solid metal 'IAQ' inner liner.
- Pressure independent primary airflow control.
- Multi-point averaging flow sensor.
- Terminal is field flippable, providing left or right installation connections. Refer to IOM for details.
- Universal access panels on all four sides of terminal for ease of maintenance and service.
- Motor blower assembly mounted on special 16 ga. (1.6) angles and isolated from casing with rubber isolators.
- Hinged door on fan controls enclosure.
- Available with electric or hot water reheat.
- All controls are mounted on exterior of terminal providing ready access for field adjustment.
- Each terminal factory tested prior to shipment.
- Single point electrical and/or pneumatic main air connection.
- Discharge opening designed for flanged duct connection.
- Full primary air valve low voltage enclosure for factory mounted DDC and analog electronic controls.
